86-135-50058478 Mon-Fri 09:00 - 17:00 No.9, Building 8. Hongguang yuan, Pidu District, Chengdu, China
+1 2223 4567 Mon-Fri 09:00 - 17:00 4th Avenue Kingston St. New York
+1 8887-3342 Mon-Fri 09:00 - 17:00 55th Floor Paulsson Bd. SF
Ceritified
ISO 9001:2008
The Best
China
Number #1
SUPLIER IN REGION
Inquire

Effect of Ni Addition on Microstructure of Matrix in Casting Tungsten Carbide Particle Reinforced

Effect of Ni Addition on Microstructure of Matrix in Casting Tungsten Carbide Particle Reinforced



Microstructure of the matrix directly influences the performance and the application of metal matrix composites. By using vacuum casting-infiltration method to manufacture casting tungsten carbide particle reinforced composite,the addition of Ni can alter the microstructure of the matrix of composite.High carbon chromium steel was chosen as the substrate.The casting process was achieved at 1580℃ with vacuum degree of 0.072—0.078 MPa.Padding of the molten steel in each part of the preform was different,and the solidification of each part of the composite was different,too.Microstructure of the matrix was various in different parts of the composite.The Ni addition had enlarged the austenite zone in matrix,which would improve the corrosion resistance of the composite.The phase identification of the composite was performed by X-ray diffraction technique.The result showed that Fe3W3C was the primary precipitated carbide and its composition had a direct link with the decomposition of the casting tungsten carbide particles.The hardness of the matrix mainly depended on the reinforced carbide,i.e.Fe3W3C

 

Get In Touch

Recommend Read